START YOUR E-BIKE

Turn on the battery using the on/off switch. The switch is located on the left side of the frame - opposite the charging port. 

Then press the ON/OFF BUTTON on the monitor display for 3 seconds. The monitor display will turn on.

Once your monitor display is ON, verify that the Battery Charging Indicator shows sufficient charge for your ride. If the battery does not have sufficient charge for your ride, please refer to instructions on how to charge the battery.

Be sure to turn the bike and battery power off when not in use or while recharging.

START YOUR RIDE

Once you begin riding, you can choose the appropriate assistance level using the INCREASE MOTOR ASSIST [+] or DECREASE MOTOR ASSIST [–] buttons on your display.

The motor will assist you once you start pedaling. There are 3 levels of assistance on the display.

NOTE

During riding, frequent braking and again accelerating will deplete the battery faster. The motor will stop assisting once you stop pedaling. Your e-bike's rated maximum load is 220lbs/100kg~ 265lbs/120kg including the rider. Do not overload your e-bike.

WARNING

When stopped, turn off the battery in case the crank arm keeps turning while you push the bike. The motor may start suddenly which may lead to an accident.

CAUTION

FOR YOUR SAFETY, PLEASE MAINTAIN AND CLEAN YOUR E-BIKE REGULARLY.